Tag Archives: Architectural Stone


Advanced Architectural Stone (AAS) provide different product materials options for projects –

  1. Cast Stone
  2. Architectural Precast
  3. Architectural GFRC (Glass Fiber Reinforced Concrete)
  4. GFRG (Glass Fiber Reinforced Concrete)


How do these products compare? How do you select a product material? Please refer to the tables below.



Basis Cast Stone Architectural Precast Architectural GFRC
Definition High quality masonry building material simulating limestone. Masonry building material produced in larger sizes; can be visually comparable to cast stone with special finishing, but without special finishing more like concrete. Masonry product made with glass fiber for strength with a hollow back having appearance of cast stone or precast at the option of the specifier.
Design Made from graded aggregates, white Portland Cement, additives and color pigments Consists of larger aggregates from 1″ to fine sands, additives and Portland cement. Mix design same as precast with the addition of glass fiber for strength and face material visually the same as cast stone or precast.
Usually produced by dry cast method with very little moisture; compacting mix densely into molds. Wet Method used; mix is poured into molds. Product sets up in mold overnight. The product has a hollowunderside; strength through glass fibers. A wet pour method.
Structural /
Non structural
This product is self supporting but is not structural. This product can be conventionally reinforced or pre-stressed to be structural. Product is not structural but is self supporting through attachments.
Weight 132 pounds per cubic foot 150 pounds per cubic foot Approximately 50% or less weight for same area covered than cast stone or precast.
Specification Defined under Masonry Division – Section 4720 of the uniform building code. Defined under Concrete Division – Specification 3450 of the uniform building codes. Defined under Concrete Division – Specification 3490 of the uniform building codes.
Speed of Manufacture Multiple pieces per day from mold; higher production output. Usually 1 piece per day per mold; limiting daily production output. Usually 1 piece per day; limiting daily production output.
Size Usually less than 4′ in length; depends on depth or cubic value. Can be larger pieces up to 20′ and can be structural. Sizes can approximate both cast stone & precast.
Cost Usually the most cost effective. More expensive due to finishing to create close visual to cast stone and daily production limitation. Most expensive to produce; higher cost offset by less installation costs.


Cast Stone (Dry) Yes Rebar Can have dowel holes; anchor slots, embedded hardware Fine grain texture simulates Limestone Architectural Trim, Facing, Ornamentation, columns
Architectural Precast Yes Various methods Cast in weld plates, Threaded inserts, Slots & Dowel holes Exposed Aggregate, Form liners, Sandblasted , Visual bug holes unless finished to look close to cast stone. Architectural panels, columns, Spandrels, Structural
GFRC Yes Glass Fiber Anchor bolts and steel frame attached to product at plant. Fine grain texture or precast finish Architectural, trim, facing, columns, spandrels; where lighter weight is helpful.
Grade II
No Cut in dowel holes and slots Fine grain texture Architectural trim, Facing, Ornamentation; long lead time
Calcium Silicate No Cut in dowel holes and slots Smooth, Rocked, Press Hammered, Dressed Architectural veneer, facing, and standard sizes only.


Cast Stone (Dry) ASTM C 1364 6,500 N/A 6% 5% Loss of mass or less @ 300 cycles
Cast Stone (Wet) 6,500 4% – 6% 6% 5% Loss of mass or less @ 300 cycles
Architectural Precast CSI 3450 5,000 4% – 6% 6% Not required
GFRC CSI 3490 1,200 (flexgard module of rupture) 8% – 10% Similar to Cast Stone / Precast Similar to Cast Stone / Precast
Limestone Grade II ASTM C 568 4,000 N/A 7.50% Not available
Calcium Silicate ASTM C 73-99A Grade: NW 3,500 SW 5,500 N/A NW 18% SW 15% Not available

AAS team is able to combine different product materials as well to meet the design, structural and installation needs. AAS has experience with creating seamless design effects and uniform design appeal while combining different product materials on a same project.


Product Info/Reference Links


  1. AAS Product Materials
  2. Cast Stone
  3. Architectural Precast
  4. Architectural GFRC (Glass Fiber Reinforced Concrete)
  5. GFRG (Glass Fiber Reinforced Gypsum)



Technology creates opportunities for automation and consistency. Advanced Architectural Stone (AAS) puts it to use for consistent product quality and consistency.

The completely automated and computerized batch plant eliminates the error and guess work while making sure raw materials quality and consistency is same through out a project. A number of gauging points, measurements feeding into the monitoring system enables consistent colors, finish, product strength for projects of any size.

Learn more about the AAS computerized batch plant in this video.


AAS Batch Plant in Works: LA Sports Hall of Fame Project

The 27,500 sq ft building embodies Trahan Architect’s vision of cane river channels. The project required large cast stone pieces each unique in its shape and complexity.
See AAS Case Study --- Cast Stone Realized Vision for LA Sports Hall of Fame Project


AAS Batch Plant, Craftsmanship in Works: Reagan Place, Old Parkland


AAS team has extensive experience in coming up with materials composition to match colors while combining different products such as cast stone, architectural precast, architectural GFRC as well as GFRG.

AAS is integral part of development of the Reagan Place, now known as Old Parkland. The team combined architectural precast, cast stone and GFRC in this project with seamless color matching. The new construction blended naturally in to the overall ambiance, culture and heritage of the site. The batch plant made it all look so uniform and consistently beautiful for this project.

AAS Project: Reagan Place, Old Parkland | AAS Computerized Batch Plant and Craftsmanship Delivered Consistency | Click on the image to see the CASE STUDY...

AAS Project: Reagan Place, Old Parkland | AAS Computerized Batch Plant and Craftsmanship Delivered Consistency | See the CASE STUDY…

Note: See AAS video tour of the plant…